Reduce risk and maintain compliance with our specialist risk management services.
We’re proud to be a leading provider of complete life cycle risk management solutions. From ensuring asset safety and legal compliance with our thorough engineering inspections to driving operational efficiency with our specialist non-destructive testing services, (and much more in between), we’re proud of the long-lasting partnerships we have formed with our customers over the last 160 years, based on the value of our solutions.
GRP (Glass/Fibre Reinforced Plastic) Tank Inspection
Safeguarding Your GRP Tanks with comprehensive specialist inspections by BES Group
In the dynamic world of industrial operations, glass-reinforced plastic (GRP) tanks stand as essential assets, playing a crucial role in storing and handling a wide range of chemicals and fluids. However, as these tanks age and undergo the rigors of continuous operation, they become increasingly vulnerable to defects and damage, jeopardising their integrity and posing safety risks.
Our comprehensive Tank inspection capabilities
Non-Destructive Testing (NDT)
We know that you may be facing challenges with your glass or fibre-reinforced plastic (GRP) tanks. Whether they’re ageing, past their design life, or you need to extend their service life, we can help you assess and mitigate associated risks.
At BES Group, we inspect GRP tanks to identify any potential defects or damage. This includes a visual inspection of the tank’s exterior and interior, as well as non-destructive testing (NDT) methods to help detect issues that may not be visible to the naked eye, such as:
- Ultrasonic Thickness Gauging
- Water Based Fluorescent Dye Penetrant Crack Detection
- Spark Testing (AC or DC Holiday testing to tank lining)
- GRP Barcol Hardness Testing
- Radiography
- Visual Inspection
Destructive Testing
We also use Destructive Testing (DT) methods such as tensile testing, impact testing, and fatigue testing to ensure the strength of your GRP tank.
In addition to this, we can deliver Fitness for Service and basic repair recommendations post assessment by a competent person in line with EEMUA 159 Tank Assessor or ASME Plant Inspector Level II.
We assess the structural and operational integrity of GRP tanks to determine their fitness for service. This includes evaluating the tank’s design, materials, and construction, as well as its operating conditions.
We inspect a variety of assets including:
- Chemical storage tanks
- Scrubbers
- Demisters
- LEV vac receivers
- Low-pressure reactor vessels
Tank Inspections
We can conduct inspections on GRP tanks that are either in service or out of service. This allows us to inspect tanks that are difficult or impossible to access while they are in operation.
To ensure our inspections are comprehensive and accurate, we conduct our inspections in line with the latest industry standards and guidance documents, including:
- EEMUA 225
- SAFed IMG02b
- HSE PM75
We can offer our customers both in-service and out-of-service options.
As part of our service at BES Group, we provide recommendations for continued service and basic repair consultancy to help you extend the life of your GRP tanks. This also includes cleaning, chemical removal, and disposal services.
Find out more about our tank inspection services
Unlock the potential of your GRP tanks with BES Group's comprehensive inspection solutions, ensuring their longevity and reliability.
Get in touch today! Get in touch today! Get in touch today!FAQs
What is the required frequency of GRP (Glass/Fibre Reinforced Plastic) Tank Inspection?
+
The required frequency of GRP tank inspection depends on several factors, including the type of tank, the contents of the tank, and the operating environment. However, a general rule of thumb is to inspect GRP tanks every 5-10 years.
Key benefits
Reduced Downtime
If a GRP tank fails, it can cause significant downtime for your business or operation. Regular inspection can help to prevent unexpected failures and keep your tanks running smoothly.
Improved Safety
GRP tanks are often used to store hazardous or flammable materials, so it is important to ensure that they are in good condition to prevent leaks or other accidents. Regular inspection can help to identify any potential safety hazards and allow you to take corrective action before they cause a problem.
Extended Tank Life
GRP tanks are typically designed to last for many years, but regular inspection can help to ensure that they reach their full potential lifespan. By identifying and addressing any problems early on, you can prevent them from becoming more serious and costly to repair.
Reduced Downtime
If a GRP tank fails, it can cause significant downtime for your business or operation. Regular inspection can help to prevent unexpected failures and keep your tanks running smoothly.
Improved Safety
GRP tanks are often used to store hazardous or flammable materials, so it is important to ensure that they are in good condition to prevent leaks or other accidents. Regular inspection can help to identify any potential safety hazards and allow you to take corrective action before they cause a problem.
Extended Tank Life
GRP tanks are typically designed to last for many years, but regular inspection can help to ensure that they reach their full potential lifespan. By identifying and addressing any problems early on, you can prevent them from becoming more serious and costly to repair.
Did you know...
100,000
GRP tanks are estimated to exist in the UK, according to the Chemical Industries Association.
111
accidents were reported involving GRP tanks worldwide from 2007 to 2022. These accidents resulted in 67 injuries and 15 fatalities, according to a study by the International Commission on Large Dams (ICOLD)
67%
of GRP tank accidents were caused by leakage, according to a study by the International Commission on Large Dams (ICOLD)
Hear what our customers have to say
We care about the journey we take our customers on, but it’s not our word you should be taking, see what our customers think of the service we provided!
“
BES is a really disruptive force in the market, they are able to provide a variety of necessary services to their customers and none of the other big players are able to provide that breadth of services.
”
Industry competitor
“
The BES inspectors are way more technically competent and diligent compared to other providers. I previously used Allianz, and BES definitely stands out due to their strong technical competence and strong back office support.
”
Customer
Project Operations Manager
“
We have been with BES for the past 5 years and don’t plan on switching providers. They are very flexible with their services and are able to bring the best inspectors who can deal with on the ground challenges and build real relationships with clients.
”
Customer
Global Technical Services Manager
“
The industry requires competence to be demonstrated, typically through UKAS accreditation, which is a prerequisite for many major clients. BES is type A accredited, which is preferred, they can provide highly objective opinions.
”
Customer
Senior Project Manager
Why choose us
Commitment to quality
BES Group is committed to providing our customers with the highest quality services possible. We use state-of-the-art equipment and software, and our assessors are all certified to the highest standards.
Nationwide service offering
No matter where you're based, we're proud to say that we can carry out Tank Inspections on sites throughout in the UK.
Specialist experience and expertise
BES Group has years of experience in providing API 579 fitness for service assessments. Our team of assessors are highly qualified and experienced, and we have a proven track record of success in helping our clients extend the service life of their piping systems and improve safety and reliability.
35,000 satisfied customers
We've built a strong reputation for providing exceptional service to over 35,000 satisfied customers from diverse industries. Our unwavering commitment to customer satisfaction has resulted in long-standing partnerships and unwavering trust.
800+ expert engineers
Our team of over 800 skilled engineers possesses a wealth of knowledge and expertise in a range of disciplines. Their deep understanding of your equipment and operating conditions ensures that they deliver proactive solutions that optimise asset performance and minimise downtime
A legacy of 160+ years of experience
With over 160 years of experience in the industry, we've witnessed the evolution of industry practices and have adapted our approach to meet the ever-changing needs of our customers. Our deep understanding of asset management, compliance and predictive technologies enables us to deliver cutting-edge solutions that drive operational excellence.
Our related services
Structural Investigations, Testing and NDT
Destructive Testing
Storage Tanks
API 579 Fitness for Service Assessments
BECS Tank Inspection Services
Inspection of Atmospheric Storage Tanks
Repair Plans for Steel Storage Vessels
Storage Tank Inspection to EEMUA 159
Tank Floor Settlement Surveys to EEMUA 159
Tank Remedial Work Signoffs
Thermoplastic Tank Inspections
Our sectors
View all sectors
Talk to us today!
