Reduce risk and maintain compliance with our specialist risk management services.
We’re proud to be a leading provider of complete life cycle risk management solutions. From ensuring asset safety and legal compliance with our thorough engineering inspections to driving operational efficiency with our specialist non-destructive testing services, (and much more in between), we’re proud of the long-lasting partnerships we have formed with our customers over the last 160 years, based on the value of our solutions.
Motor and Current Analysis
Comprehensive insights into the health of your equipment and assets
Is your equipment suffering from issues such as overheating, short circuiting, or imbalances?
Our team at BES Group can provide an industry-leading Motor and Current Analysis service to diagnose and rectify these challenges. Our specialist approach ensures that we can identify root causes, including overheating, short circuiting, imbalances, as well as defects in bearings and motor windings.
By leveraging advanced analysis techniques, we provide comprehensive insights into the health of your equipment and assets. Detecting potential problems early on allows for targeted interventions, preventing costly breakdowns and optimising the overall performance and longevity of your machinery.
Trust our team of experts at BES Group to elevate the reliability of your assets.
Motor and Current Analysis is a Condition Monitoring technique that uses the current drawn by an electric motor to detect problems with the motor or the system it is connected to.
The current drawn by a motor can be affected by a variety of factors, including the load on the motor, the speed and temperature of the motor and the condition of the motor’s bearing and windings.
It is a valuable tool for preventing costly repairs and downtime, improving the performance and efficiency of your motors, and reducing energy consumption.
At BES Group, we can deliver expert Motor and Current Analysis services to help you diagnose and identify problems with electric motors in their early stages, preventing serious damage. We would be happy to discuss your concerns and specific requirements to tailor a plan that is right for you.
Ready to revitalise your equipment's health!
Don't wait, schedule a call with one of our experts Don't wait, schedule a call with one of our experts Don't wait, schedule a call with one of our expertsHow our Motor and Current Analysis service can benefit you
Identifying faults
If a motor fails, motor and current analysis can help identify the cause of the failure. This information can then be used to prevent future failures.
Optimised performance
Motor and Current Analysis can be used to optimise the performance of electric motors by adjusting the load on the motor, the speed of the motor or the cooling system.
Prevent downtime
By identifying problems early on, it is possible to take corrective action before they cause major damage, saving your business money and helping to avoid unnecessary downtime.
Identifying faults
If a motor fails, motor and current analysis can help identify the cause of the failure. This information can then be used to prevent future failures.
Optimised performance
Motor and Current Analysis can be used to optimise the performance of electric motors by adjusting the load on the motor, the speed of the motor or the cooling system.
Prevent downtime
By identifying problems early on, it is possible to take corrective action before they cause major damage, saving your business money and helping to avoid unnecessary downtime.
How we'll work with you
From initial monitoring to the output reports, this is how BES Group make a difference
Monitoring – We use a variety of methods to monitor the current drawn by your motors, including online monitoring, offline monitoring, and portable monitoring.
Analysis – We use advanced data analysis techniques to identify patterns and trends in the current data.
Diagnosis – We use our expertise to diagnose the problems that are causing the current abnormalities.
Reports and Recommendations – We will provide you with a full in-depth report that includes recommendations for corrective action to prevent further damage to your motors.
Why choose us
Proven Service
We have a proven track record of providing CBM and Condition Monitoring services to a wide range of industries, including national maintenance companies and OEMs.
Experienced Engineers
Our certified reliability engineers identify and solve vibration problems in rotating machinery.
Global motor and current analysis services
We provide Motor and Current Analysis services worldwide, including the UK, overseas, and offshore.
Did you know...
80%
of motor failures can be prevented by using Motor and Current Analysis, according to the National Electrical Manufacturers Association (NEMA).
30%
reduction in unplanned downtime can be achieved by using Motor and Current Analysis, according to the American Society of Mechanical Engineers (ASME).
10%
reduction in energy consumption can be achieved by using Motor and Current Analysis, according to the International Electrotechnical Commission (IEC).
Hear what our customers have to say
We care about the journey we take our customers on, but it’s not our word you should be taking, see what our customers think of the service we provided!
“
BES Group has demonstrated exceptional service, earning our commendation. We extend our appreciation for the meticulous vibration analysis conducted and the invaluable on-board work and advice provided by Simon. Through their prompt and dedicated efforts, our ship is poised to sail tomorrow, providing essential assurance to the Vessels Owner. Simon’s responsiveness at short notice is particularly noteworthy, and we express our sincere gratitude for the commitment to excellence displayed by the entire BES Group team.
”
Michael Wilkinson
Vessel Manager
“
Some of the other international players don’t even have nationwide coverage. BES was able to offer us local resources across the country for our complex operations, there is no other provider that could give us that.
”
Customer
Project Manager
“
The BES inspectors are way more technically competent and diligent compared to other providers. BES definitely stands out due to their strong technical competence and strong back office support.
”
Customer
Project Operations Manager
FAQs
What are the different types of Motor and Current Analysis?
+
There are two types of Motor and Current Analysis:
1. Time Domain Analysis: This involves looking at the current waveform over time. This can help diagnose problems such as misalignment and bearing defects.
2. Frequency Domain Analysis: This involves looking at the frequency spectrum of the current waveform. This can help diagnose problems with the motor winding and rotor imbalances.
Explore our related services
Condition Monitoring
Motor and Current Analysis
Thermographic Surveys
Ultrasonic Condition Monitoring
Vibration Analysis
Video Deflection and ODS
Our credentials
View all our accreditationsAmerican Bureau of Shipping
British Engineering Services Asset Reliability Ltd.
Avetta
British Engineering Services Asset Reliability Ltd. - BES Group Electrical Ltd.
Alcumus ISOQAR
British Engineering Services Limited - British Engineering Services Asset Reliability Ltd. - BES Group Electrical Ltd.
Alcumus ISO 14001
BES Group Testing Ltd. - British Engineering Services Asset Reliability Ltd. - Notus Heavy Lift Solutions Ltd. - XEIAD
Alcumus ISO 9001
BES Group Testing Ltd. - British Engineering Services Asset Reliability Ltd. - Notus Heavy Lift Solutions Ltd. - XEIAD - British Engineering Services Asset Reliability Mimic Ltd.
Alcumus ISOQAR 45001
Notus Heavy Lift Solutions Ltd. - XEIAD - British Engineering Services Asset Reliability Ltd.
RISQS
XEIAD Ltd - British Engineering Services Asset Reliability Ltd - British Engineering Services Asset Reliability Strainstall Ltd - Inspired Access Ltd - Inspire Structures Ltd
BINDT
British Engineering Services Asset Reliability Ltd.
MOBIUS Institute
British Engineering Services Group Asset Reliability Ltd.
American Bureau of Shipping
British Engineering Services Asset Reliability Ltd.
Avetta
British Engineering Services Asset Reliability Ltd. - BES Group Electrical Ltd.
Alcumus ISOQAR
British Engineering Services Limited - British Engineering Services Asset Reliability Ltd. - BES Group Electrical Ltd.
Alcumus ISO 14001
BES Group Testing Ltd. - British Engineering Services Asset Reliability Ltd. - Notus Heavy Lift Solutions Ltd. - XEIAD
Alcumus ISO 9001
BES Group Testing Ltd. - British Engineering Services Asset Reliability Ltd. - Notus Heavy Lift Solutions Ltd. - XEIAD - British Engineering Services Asset Reliability Mimic Ltd.
Alcumus ISOQAR 45001
Notus Heavy Lift Solutions Ltd. - XEIAD - British Engineering Services Asset Reliability Ltd.
RISQS
XEIAD Ltd - British Engineering Services Asset Reliability Ltd - British Engineering Services Asset Reliability Strainstall Ltd - Inspired Access Ltd - Inspire Structures Ltd
BINDT
British Engineering Services Asset Reliability Ltd.
MOBIUS Institute
British Engineering Services Group Asset Reliability Ltd.
Our sectors
Contact us today!
